FFKM is a family of perfluoroelastomers for demanding chemical and thermal sealing. Kalrez, Chemraz and Simriz are brand names for specific product ranges, not universal FFKM specifications.
An alternative to a branded FFKM seal requires verification of compound, dimensions, temperature, media, compression set and documentation. FFKM 70 Shore A and FFKM 75 Shore A describe hardness, not interchangeable chemical performance.
Comparison of common sealing materials
This table is general guidance, not material approval. Actual temperature limits and compatibility depend on compound, hardness, exposure time and operating conditions.
How the medium affects material selection
Mineral oil and hydraulic oil: NBR is a common starting point. HNBR, FKM and selected PU grades may be appropriate depending on temperature, wear and pressure. EPDM is generally unsuitable for mineral-oil-based fluids.
Water and water-glycol: EPDM is often a useful starting point, but inhibitors, concentration and temperature must be assessed. Other compounds may work with specific mixtures.
Fuels and solvents: FKM can be suitable for many fuels, but not all solvents. Verify the exact chemical formulation before selecting a compound.
Aggressive chemicals and high temperatures: FFKM or PTFE may be considered, but neither is universally suitable. PTFE also requires an appropriate seal design.
Five questions before ordering
- What is the medium, including concentration and additives?
- What are the continuous temperature and short-term peaks?
- What are the operating pressure, pressure spikes and motion?
- What geometry, dimensions and hardness are required?
- Are test reports, certificates or specific approvals needed?
Common material selection mistakes
Selecting a material from a generic temperature chart alone. A compound may tolerate a temperature in air but not in the actual medium.
Assuming all NBR, FKM or EPDM grades have identical properties. Compounds within the same family can differ substantially.
Replacing a seal with a more expensive material without checking groove design, squeeze, friction and mechanical properties.
General technical guidance, not approval for a specific application. Confirm material grade, dimensions and suitability for actual operating conditions.
← All technical insights